Bild 1 - MOERSCH Eco Film Developer 750ml (1xA 500 ml + 1xB 250ml)

MOERSCH Eco Film Developer 750ml (1xA 500 ml + 1xB 250ml)

  excl. VAT * incl. VAT **
1 Pce. 24,29 EUR 28,91 EUR
* plus 19% tax | plus shipping
** including 19% tax | plus shipping
Item #: 38750
EAN: 4260349890328
Mailorder availability:
In stock. Within Europe in 2-5 days. In stock. Within Europe in 2-5 days.
Berlin store pick up:
Available in the store in Berlin **
Powder to make:
Download: PDF-DatenblattPDF-Datenblatt


ecologically friendly and free from dangerous substances

high contour sharpness, fine-grained up to 200 ASA, accentuates the grain with higher ASA films

economical, two-part developer concentrate to make a one-shot developer

Can also be used as a paper developer with dilution between 1+2+20 and 1+1+25

Shelf life of the concentrate:

guaranteed minimum shelf life of Solution A is two years; the Solution B will last practically forever.

The developer is delivered as a two-part concentrate. Part A is the developer concentrate, Part B is the activator. The developer solution should be mixed at a ratio of 1+1+50 with (demineralized) water for most films. For other possible dilutions please see the product info sheet. The working solution will stay good for a couple of days, but for best results we recommend mixing only as much working solution as is needed for immediate use.

For precise measuring of small amounts, pipettes are included. The Pipette adapter is pressed into the bottle neck. With the pipette attached, the bottle is then turned and the required amount of chemical is pulled into the pipette. To avoid mixing up the pipettes and contaminating the developer concentrates, the pipettes can be left on the bottles. The adapter allows the bottle to seal tightly even with the pipette in place. To measure larger amounts of chemicals into a measuring beaker, just remove the pipette. The adapter should stay on the bottle.