You will get exactly reproducable results while still keeping full creative control over your development procecsses.
You like to have a compact processor for blackandwhite film development, colour C-41, e-6 slides, RA-4 colour prints? You name it! The Jobo CPE-3 puts you into the position to do it all by yourself in your home darkroom.
Advantages of rotation processing are a very economical chemical consumption, very even development and exactly reproducable results.
The chemicals and film or print are all kept at the same controlled temperature in a common thermostacically controlled water-jacket. Temperature coan continuously be set between 20° and 40°. A red indicator light signals when the heater is in operation. All graduates and bottles lock into place and are kept from floating thus providing an even water level and optimum tempering.
The CPE-3 is compatible to all JOBO tanks and drums with the exception of EXPERT / Multi Drums of the tank series 3000.
The inluded Jobo Lift significantly improves the work with your CPE-3. Installation and de-installation of the tank is easily avoided.
Chemicals and water can be filled in through a funnel on top of the lift. Emptying the tanks can easily be done by lifting the lift,which leads to the liquids flowing out through a hose right into a provided storage tank.
- CPE-3 Prozessor
- 4 Flaschen 600ml
- 4 Mensuren 250ml
- 1 Tank 1520
- 1 Magnet 1504
Film and paper capacity:
- 5x 135-36
- 6x 120
- 12x 4x5"
- Papers up to 30x40cm
- Size: 25,5 cm x 65,5 cm x 33 cm (HxWxD)
- Weight empty: 3 kg
- Voltage: 230V/50Hz 330W
- 110V/60Hz 300 W
- Temperature Range: 20-40°